Blumfeldt Queensway Manual De Instrucciones página 13

OPERATION
If the clock does not work properly, check that the battery is fully charged. If
not, replace the battery.
If the battery is OK but the clock still does not work, proceed as follows:
1. Remove the battery. Align the hands at 12 o'clock and unscrew the cap nut.
2. Carefully remove the minute and hour hands by lifting the round metal
part of the clock hands near the shaft and pulling it out.
3. Align the hands at 12 o'clock and insert the hour hand into the shaft,
followed by the minute hand. Then screw the cap nut back on.
4. Turn the minute hand two full turns to ensure that the hands do not touch
each other or the frame.
If you are hanging the clock on the wall, make sure that the wall is level and
that nothing is touching the dial of the mechanism. If there is an obstruction,
please remove it or hang the clock elsewhere on the wall.
Note: The clock has no second hand, you will only see that the clock is
running after a few minutes. The hands of the clock are flexible and can be
bent with the hands if necessary.
EN
13