Worx Professional WU643 Traducción De Las Instrucciones Originales página 6

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 38
Additional safety points for your
finishing sander
1
Remove the plug from the socket before carrying out any adjustment,
servicing or maintenance.
2
Fully unwind cable drum extensions to avoid potential overheating.
3
When an extension cable is required you must ensure it has the
correct ampere rating for your power tool and is in a safe electrical
condition.
4
Ensure your mains supply voltage is same as indicated on the rating
plate.
5
Your tool is double insulated for additional protection against a
possible electrical insulation failure within the tool.
6
Always check walls, floors and ceilings to avoid hidden power cables
and pipes.
7
After long working periods external metal parts and accessories
could be hot.
8
If possible, ensure the workpiece is firmly clamped to prevent
movement.
9
Your finishing sander is a hand held tool, do not clamp your finishing
sander.
10
Before sanding, check the area is free of nails, screws, etc.
11
Never stop the finishing sander by applying a force to the baseplate.
12
Only use paper in good condition. Do not use torn or worn paper.
13
Do not sand material containing asbestos due to a health risk.
14
Do not sand lead based paint due to the risk of lead poisoning.
15
Do not eat or drink in the working area of the sander.
16
Do not allow people to enter the working area without wearing a dust
mask.
All manuals and user guides at all-guides.com
17
18
19
20
21
22
23
6
Where possible, seal off the working area to contain the dust for later
removal.
Your tool is designed for dry sanding only, not wet sanding.
Your tool is designed for general purpose light polishing of wood and
metals.
Do not sand magnesium material due to the risk of fire.
Always wear safety glasses or eye shields when using the
sander. Everyday eyeglasses have only impact-resistant lenses;
they are NOT safety glasses. Following this rule will reduce the risk
of serious personal injury.
Always wear hearing protection during extended periods of
operation. Following this rule will reduce the risk of serious personal
injury.
Harmful/toxic dusts will arise from sanding e.g. lead painted surfaces,
woods and metals. Contact with or inhalation of these dusts can
endanger the health of operator and bystanders. Always use eye
glasses and dust mask.
Warning: Some dust particles created by power sanding,
sawing, grinding, drill and other construction jobs contain
chemicals known to cause cancer, birth defects or other
reproductive harm. Some examples of these chemicals are:
Lead from lead-based paints.
Crystalline silica from bricks and cement and other masonry products.
Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending upon how often
you do this type of work.
To reduce your exposure to these chemicals:
Work in a well-ventilated area.
Work with approved safety equipment, such as those dust masks
that are specially designed to bag microscopic particles.
Tabla de contenido
loading

Este manual también es adecuado para:

Wu644

Tabla de contenido