This manual contains IMPORTANT WARNINGS and INSTRUCTIONS.
Equipment in this manual is exclusively for painting purposes.
Do not use for other purposes.
The operator shall be fully conversant with the requirements stated in this instruction manual including important warnings, cautions and
operation and correct handling.
Read and understand the instruction manual, before use and retain for reference.
This Anest-iwata spray gun kit complies to ATEX regulations 94/9/EC,
Protection level
2 G X Suitable for use in Zones 1 and 2.
X marking
Any static electricity discharge from the spray gun is to be diverted to the grounded the conductive air hose as stipulated
Be sure to observe warnings and cautions in this instruction manual.
If not, it can cause paint ejection and serious bodily injury by drawing organic solvent.
Be sure to observe following
Indicates a potentially hazardous situation which, if not avoided, may result in serious injury or loss of life.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or property
damage.
Indicates notes which we ask you to observe. The safety precautions in this instruction manual are the minimum
necessary conditions. Follow national and local regulations regarding fire prevention, electricity and safety as well
as your own company regulations.
Important specifications
Max. Pressure
Noise level
Spray condition
Recommended
Measuring point
1m backwards from gun , 1.6
Air connection
G/1/4 M
Main specifications
Type of
Model
feed
LS-400-1301
LS-400-1302
LS-400-1303
LS-400-1304
LS-400-1401
Gravity
LS-400-1402
LS-400-1403
LS-400-1404
LS-400-1503
LS-400-1504
marked items which are especially important.
/
b a r /
height
Nozzle
Size
Air cap
1
assy
Atomizing
mm
Mark
air pressure
(inch)
MPa (bar /PSI)
LS-400-01
(1.3/19)
LS-400-02
1.3(0.051)
LS-400-03
(1.7/25)
LS-400-04
LS-400-01
(1.3/19)
LS-400-02
1.4(0.055)
LS-400-03
(1.7/25)
LS-400-04
LS-400-03
1.5(0.059)
(1.7/25)
LS-400-04
Mass g (l b s)
Max. Temperature
Atmosphere
Air Fluid
Fluid connection
Recommended condition
Air pressure
inside air cap
MPa (bar /PSI)
0.13
0.17
0.13
0.07
(0.7/10)
0.17
0.17
425
0.94
G1/4 F
Air
Fluid output
Consumption
ml/min
l/min (cfm)
300(10.56)
115
305(10.73)
145
390(13.73)
300(10.56)
130
305(10.73)
155
390(13.73)
165
390(13.73)
Pattern
Width
mm (in)
320(12.6)
310(12.2)
290(11.4)
330(13.0)
320(12.6)
300(11.8)
305(12.0)