Problem Solving - Wahl 1877 Manual De Uso

E N G L I S H
f For a good and long-lasting cutting performance, it is
important to oil the blade set frequently.
f If the cutting performance deteriorates after long use
despite regular cleaning and oiling, the blade set should
be replaced.
Changing the blade set
1. Slide the blade set off the housing in the direction of the arrow
(Fig. 7ⓐ). Remove the blade set.
de
2. Replace the blade set by hooking it into the housing and pressing it
down until it clicks into position (Fig. 7ⓑ).
en
fr

Problem solving

Blade set is cutting badly or pulling hair out.
it
Cause: Blade set is dirty or worn out.
f Clean and oil the blade set. If this does not resolve the problem,
es
replace the blade set.
pt
Skin injury
Cause: Too much pressure on the skin.
nl
f Reduce pressure when cutting close to skin.
da
Cause: Damaged blade set.
f Check whether the blade edges were damaged during use and
sv
replace the blade set if necessary.
no
Battery operating time is too short
Cause: A blade set that is very dirty and has not been oiled can reduce
fi
the available battery operating time substantially!
f Carefully clean and oil the blade set. If the blade set is clean and
tr
oiled and the battery operating time is still far too short, it is likely
that the batteries are nearing the end of their life.
pl
Cause: Battery power indicator is imprecise.
cs
f Fully discharge the appliance before fully recharging it in one unin-
terrupted charging process.
sk
Battery power indicator light does not light up
hr
Cause: Appliance has not been correctly placed on the charging stand.
f Ensure that the appliance has been correctly placed on the charg-
hu ing stand.
sl Cause: appliance socket is dirty.
f Clean the appliance socket.
ro
Cause: Defective power supply.
f Make sure that there is a faultless contact between the plug-in
bg
transformer and the socket.
f Check the mains cable for possible damage.
ru
Battery charge indicator blinks red
uk
f Check whether the blade set is blocked and the blade is able to
move. Switch the appliance on and off. If the battery charge indica-
et
tor is blinking, please contact your specialist retailer or a WAHL
service centre.
lv
In the event that this information does not help you resolve your
lt
problem, please contact our service centre. Never attempt to repair the
appliance yourself!
el
10
ar
Disposal
Handle with care! Environmental damage in the event of
incorrect disposal.
f Discharge batteries prior to disposal!
f Correct disposal will ensure environmental protection
and prevent any potentially harmful impact on people
and the environment.
Adhere to the relevant legal requirements when disposing of the
appliance.
Information on the disposal of electrical and electronic appliances
in the European Community:
Within the European Community, national regulations are
specified for the disposal of electrical appliances, based
on EU Waste Electrical and Electronic Equipment Directive
2012/19/EC (WEEE). In accordance with this, the appliance
can no longer be disposed of with the local or domestic
waste.The appliance will be accepted free of charge by local
collection points or recycling centres. The packaging for this
product is made from recyclable materials. Dispose of this in
an environmentally friendly manner by recycling it.