Using The Amplifier Safely And Correctly; Before Use - Eclipse TDA501 II Manual Del Usuario

Using the Amplifier Safely and Correctly

■Before Use

The following indications are given in this instruction manual and on the product itself to ensure that
you use the product safely and correctly, and to prevent hazards posed to the customer or other
people, and damage to property. Make sure you understand the information in these indications
before reading the main text.
WARNING
CAUTION
● Do not use any voltage other than that marked on the product body.
This can lead to fire, electric shock, or product failure.
● Do not open the amplifier cabinet.
This can lead to electric shock or injury. If internal inspection, adjustment or repairs are
required, please consult Fujitsu Ten.
Do not modify the product.
This can lead to fire or electric shock.
● Do not use the amplifier in a bathroom, anywhere where it will be exposed to rain, or in an
environment with high humidity.
This can lead to fire or electric shock.
● Do not place a vase, flower pot, cup, or any vessel containing cosmetics, chemicals or water on
or near the amplifier.
If water or foreign matter gets inside the amplifier, it could lead to fire or electric shock.
● Do not use any power cable other than the one supplied with the product.
Using another power cable could lead to fire or accidents.
● Do not damage the power cable, bend it excessively, twist it, modify it, or rest the amplifier on it.
Note also that resting heavy objects on the power cable, subjecting it to heat or pulling on it
could break the cable, leading to fire or electric shock.
● Do not make too many connections at the same location.
This can cause fire due to heat generation.
● If the power cable is damaged (i.e. the wire cores are exposed or broken), replace it.
Continuing to use a damaged cable can lead to fire or electric shock.
● If you notice any abnormal status, such as an abnormal noise, heat buildup on the plug or
cable, emission of smoke, or a strange smell, switch the power off, disconnect the cable from
the power outlet, and request an inspection.
Continuing to use the product in the abnormal status could lead to fire or electric shock.
● If you drop or break the amplifier, turn off the power switch on the equipment itself, remove the
plug (POWER) from the power outlet, then contact Fujitsu Ten. Continuing to use the amplifier
in this condition may lead to fire or electric shock.
● When thunder starts, for the sake of safety, promptly remove the plug from the power outlet and
avoid touching the antenna wire or plug. Thunder can lead to fire, electric shock, or product failure.
Ignoring this indication and handling the product incorrectly may lead to
death or serious injury.
Ignoring this indication and handling the product incorrectly may lead to
injury or property damage.
WARNING
- 13 -