Barrette ROUND POST ADAPTER Instrucciones De Instalación página 3

1.
Determine size of your gate post, you can mount
to posts that are 2", 21/2" or 3". Refer to images
(Fig.1, Fig. 2, Fig. 3) to put together correctly.
NOTE:
Two are required for latch installation.
2.
Insert one of your bracket assembly from step 1
into the base as illustrated (Fig. 4). Refer to Figure
5 for right-handed installation.
3.
Disassemble the A & B brackets off of the
pool latch (sold separately) by unscrewing the
adjustment screw and removing the brackets
(Fig. 6).
4.
Install new brackets from steps 1 & 2 above
onto the latch as illustrated (Fig. 7) & tighten
adjustment screw until F bracket is flush with
the bottom of latch.
21/2" Installation
E
D
F
Left-Handed
Installation
2" Installation
E
C
Fig. 2
3" Installation
E
Fig. 4
F
A
A
B
Fig. 1
Fig. 3
Fig. 5
Right-Handed
Installation
Fig. 6
Unscrew
Adjustment
Screws
Fig. 7
3