Before You Begin - Remington MB4030 Manual De Instrucciones

Ocultar thumbs Ver también para MB4030:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
ENGLISH
• The charging indicator will light up.
Your appliance cannot be overcharged. However if the
product is not going to be used for an extended period of
time (2-3 months), unplug it from the mains and store. Fully
recharge your appliance when you would like to use it
again.To preserve battery life, let them run out every 6
months then recharge for 14-16 hours.
Corded
,
Connect the appliance to the mains and recharge for 5 mins
before using.
A CAUTION
Extended mains use will result in the reduction of the battery
life.
FHOW TO USE

,Before you begin

• Always comb your beard or moustache with a fine comb
before you start trimming
,Adjusting the trim length
• The trimmer comb can be adjusted to give you 9 different
trim lengths simply by turning the wheel to the desired
setting.
• Turn the wheel clockwise for shorter length, anti-clockwise
for longer length.
• The wheel will click into place as it reaches each setting, and
the setting number will appear on the length position
indicator.
4
All manuals and user guides at all-guides.com
ENGLISH
SETTING
HAIR DESCRIPTION
Stubble or Cropped
1
look
2
Short
3
4
5
Medium
6
7
8
Long
9
,0.5 – 5.5mm guide comb
The 0.5 – 5.5mm guide comb can be adjusted to give you
settings of 0.2mm adjustment simply by turning the wheel to
the desired setting. Turn the wheel clockwise for longer length
and anticlockwise for shorter length.
The setting will appear on the length position indicator.
,Attaching and removing the 0.5 – 5.5mm guide
comb.
With the trimmer blade facing away from you, slide the guide
comb on top of the trimmer blade and click into position.
With the trimmer blade facing away from you, carefully push
the guide comb away from the trimmer blade.
HAIR LENGTH
1.5mm
0.06''
2.5mm
0.1''
4mm
0.16''
5.5mm
0.22''
7mm
0.28''
9mm
0.35''
11mm
0.43''
14mm
0.55''
18mm
0.71''
5
Tabla de contenido
loading

Tabla de contenido