Important Safety Instructions - Spectroline LeakTracker Plus Manual De Instrucciones

LeakTracker™ Plus Industrial UV Flashlight Instructions:
Pinpoint Leaks in ALL Closed-Loop Circulating Fluid Power Systems
Containing Fluids Miscible with Petroleum or Synthetic-Based Oils, Fuels, and
Lubricants, or Miscible with Water and Water/Glycol. Works with all
Spectroline® fluorescent dyes.
UV light emitted from this product. Avoid eye and skin exposure to unshielded
FOR PROFESSIONAL EXAMINATION USE ONLY
•
Never use this equipment in any manner not specified in these
instructions because your protection may be impaired.
•
NEVER aim the flashlight in the direction of another human being. It is
meant for professional fluorescent inspections ONLY!
•
DO NOT attempt to modify the lens assembly or light output. Doing so
may alter the performance and intensity of the LeakTracker™ Plus and
render the item out of compliance.

IMPORTANT SAFETY INSTRUCTIONS:

Do not look directly into the light. ALWAYS Wear the UV-absorbing protective
glasses provided when operating the LeakTracker™ Plus. Use in low-light
conditions to achieve the best inspection results.
For best results, use flashlight with any of the Spectroline®
super bright universal dyes (Oil-Glo Ultra, Water-Glo Ultra,
Gas-Glo Ultra, or Aero-Brite Ultra) to find leaks.
FAST, EASY LEAK DETECTION:
Add the appropriate fluorescent dye and run the system to circulate
instructions included with dyes)
Scan the system with the flashlight while wearing the UV-absorbing glasses. You
will easily see the precise location of every leak by its bright fluorescent glow. For
best results, use in low-light conditions.
TO OPERATE: Press the left button once to turn the flashlight on. Press it again
to turn the flashlight off. Batteries are included.
Part NO. SPI-LTP
WARNING
products.
IMPORTANT:
FLUORESCENT DYES REQUIRED
.
2
(see