Tabla de contenido
Idiomas disponibles
Idiomas disponibles
- This electric power tool complies with national and
international standards and safety requirements.
4.2 Working Capital adjustments
- Avoid unintentional starts.
- Make sure the switch (10) is in the OFF position before
connecting the machine to the mains.
- In case of failure or overload the machine stops. I pressed
the switch (11) to restart.
5. Maintenance and Service Instructions
- Keep tools clean for better and safer performance.
- Follow instructions for changing accessories.
- Check the power cord of the tool and if damaged must be
replaced by an authorized service Stayer Iberica S. A
- Ensure that the motor ventilation slots are kept clean and
dust free at all times, and that otherwise can cause
overheating and engine damage.
5.1 Check Damaged Parts
- Before using the machine should be carefully checked to
determine that it will operate properly and perform its
intended function.
- Ensure correct alignment of moving parts, check for bent.
- Check for any broken parts, damaged or missing.
- Assembly, make sure it is properly connected.
- A guard or other part of the machine that is damaged
should be repaired or replaced by an authorized service
center Stayer Iberica S.A.
5.2 Repair service
Our after-sales service responds to your questions
concerning maintenance and repair of your product as well
as spare parts. Exploded views and information on spare
parts can also be found under:
Our customer consultants answer your questions
concerning best buy, application and adjustment of
products and accessories.
5.3 Disposal and recycle
We recommend subjecting electric tools, accessories and
packaging to a recovery process that respects the
environment.
Do not throw electric tools to the garbage!
For EU countries only:
In accordance with European Directive
2002/96/EC on unserviceable electric and
electronic apparatus, after its transposition into
national law, electric tools must be collected
separately to subject them to ecologic recycling.
ENGLISH
13
6. Regulations
6.1 Technical data
= Power input
= Tank capacity
= Air flow
= Suction pipe diameter
= Weight
kg
L
= Sound power level
WA
L
= Sound pressure level
A
P
= Vibration
L Value K
of uncertainty is
60745-1. The values given are valid for nominal voltages
[U] 230/240 V ~ 50/60 Hz - 110/120 V ~ 60Hz. For lower
voltage and models for specific countries, these values can
vary. Please observe the article number on the type plate of
your machine. The trade names of the individual machines
may vary.
6.2. EU declaration of conformity
The undersigned: STAYER IBERICA, S.A.
With address at:
Calle Sierra de Cazorla, 7
Área Empresarial Andalucía - Sector 1
28320 PINTO (MADRID)
Tel.: +34
91 691 85 16
CERTIFIES
That the machine:
Type: DUST COLLECTOR
Models: VAC 70 B
We declare under our sole responsibility that this product is
in conformity with the following standards or standardized
documents: UNE-EN 60335-2-2:2010/A11:2012,
according to EU Regulations 2006/42/CE, 2004/108/CE,
2006/95/CE.
Ramiro de la Fuente
Director Manager
13
0,92 m/s ²
in accordance with
/ Fax: +34 91 691 91 72
January 5, 2017
EN
Tabla de contenido
