Connecting The Engine Switch Cable; Adding Oil To The Engine - Toro 58604 Manual Del Operador

4
Connecting the Engine
Switch Cable
No Parts Required
Procedure
1. Plug the engine switch cable into the engine
on/off switch.
Figure 13
2. Plug the other end of the cable into the connector
on the engine.
Figure 14
5

Adding Oil to the Engine

Parts needed for this procedure:
1 Engine oil
Procedure
1. Move the machine to a level surface.
2. Remove the dipstick.
g361563
1. Filler tube
2. Dipstick
3. Slowly add oil into the filler tube until the level is
at the top thread of the tube.
4. Insert the dipstick into the oil-fill tube and tighten
it.
g361571
10
Figure 15
3. Upper limit
4. Lower limit
g360549