Maintenance And Service; Maintenance And Cleaning; After-Sales Service And Application Service - Bosch D-tect 120 Professional Manual Original

OBJ_BUCH-2149-001.book Page 17 Wednesday, March 26, 2014 5:19 PM
Troubleshooting – Causes and Corrective Measures
Error
Measuring tool cannot be switched on
Measuring tool switched on but does not react
"Service required"
"Battery temperature has fallen
short of/exceeded battery
temperature range"
"Stong radio signal detected"

Maintenance and Service

Maintenance and Cleaning

 Check the measuring tool each time before use. In case
of visible damage or loose components inside the measur-
ing tool, safe function can no longer be ensured.
Keep the measuring tool clean and dry at all times to ensure
proper and safe working.
Do not immerse the measuring tool in water or other fluids.
Wipe away debris or contamination with a dry, soft cloth. Do
not use cleaning agents or solvents.
In order not to affect the measuring function, decals/stickers
or name plates, especially metal ones, may not be attached in
the sensor area 14 on the front or back side of the measuring
tool.
If the measuring tool should fail despite the care taken in man-
ufacturing and testing procedures, repair should be carried
out by an authorised after-sales service centre. Do not open
the measuring tool yourself.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the measuring tool.

After-sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
Bosch Power Tools
Cause
Battery pack empty
Batteries empty
Measuring tool has a fault
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0844) 7360109
E-Mail: [email protected]
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
English | 17
Corrective Measure
Charge battery pack
Replace batteries
Remove and reinsert rechargeable
batteries/batteries
Send measuring tool to customer ser-
vice agent
Wait until the permitted temperature
range of the battery has been reached
or change the battery
If possible, remove the interfering ra-
dio waves, e.g. WLAN, UMTS, radar,
transmitter masts or microwaves.
2 609 141 143 | (26.3.14)