Hoshizaki ACK-40-A Manual De Instrucciones página 9

ENGLISH
Bushing (No. 10)
3) Part No. 1
4) Part No. 3
When replacing or refilling the citric acid pack, do not overtighten or forget to tighten the cap nut. Check for leakage after
tightening the nut.
The concentration of citric acid solution must not exceed 40%. Use citric acid hydrate approved as a food additive.
Base (2 points)
Cap Nut
Step 9
Remove the cap nut, pour 1250 ml of 40% citric acid solution into the
pack and tighten the cap nut before connecting the cleaning pack assy
(No. 3) to machine side. (For replacement, remove the cap nut from
the old pack and tighten the nut to the new pack.)
* Ask qualified personnel about the 40% citric acid solution or
purchase the solution at home center.
When making the solution by yourself, stir 580 g of citric acid hydrate
commercially available as a food additive into 870 ml of warm water to
thoroughly dissolve it and pour the solution in the pack.
NOTICE
Step 7
While putting the parts assembled in Step 6 into the
unit front, use the bushing (No. 10) to protect the
tube taken out from the front in Step 5 and set it in
the sheet metal hole.
Then, use the three T2 truss head tapping screws
(No. 2) to fix the tube to the base (2 points) and the
top (1 point).
Step 8
Insert the base - cleaning (No. 1) into the base lug
and secure it to the base using the two T2 truss
head tapping screws (No. 2).
6
Top (1 point)
Lug