Button Lock; Oven Temperature Control; Sabbath Mode - Jennair JJW3430LL Manual

MODE

Button Lock

Number Entry
Probe
Temp Calibration
NOTE: For double oven
models, upper and lower
calibration are available.
Touch Calibration
Service Info.
Legal Info.
Restore Defaults
*The default for these settings is set at the Welcome screen.
Button Lock
The Button Lock shuts down the control panel keypads to avoid
unintended use of the oven(s). The Button Lock will remain set
after a power failure if it was set before the power failure occurs.
When the control is locked, only the Power keypad will function.
The Button Lock is preset unlocked but can be locked.
To Activate the Button Lock:
1. From the Tools menu, touch BUTTON LOCK.
2. Touch LOCK to activate the Button Lock mode.
NOTE: The touch screen will return to idle mode and a control
locked message will be displayed.
To Deactivate the Button Lock:
1. Touch the Power keypad, and then follow the on-screen
directions.
NOTE: The oven will generate a random sequence of shapes
that must be touched in the order prompted on the screen.

Oven Temperature Control

IMPORTANT: Do not use a thermometer to measure the oven
temperature. Elements will cycle on and off as needed to maintain
a consistent temperature but may run slightly hot or cool at any
point in time due to this cycling. Opening the oven door will affect
cycling of the elements and impact the temperature.
The oven provides accurate temperatures and has been
thoroughly tested at the factory. However, it may cook faster or
slower than your previous oven, causing baking or browning
differences. If necessary, the temperature calibration can be
adjusted in either Fahrenheit or Celsius.
On double ovens, the upper oven and the lower oven can each be
calibrated independently.
A minus sign means the oven will be cooler by the displayed
amount. The absence of a minus sign means the oven will be
warmer by the displayed amount. Use the following chart as a
guide.
AVAILABLE SELECTIONS
■ Lock
■ Number Pad
■ Scroll (Default)
■ Convect Roast
■ Convect Bake
■ Food Guide (default)
■ Bake
■ +35°F to -35°F
■ +20°C to -20°C
■ Use to calibrate touch
screen
■ Model Number, Serial
Number, and contact
information
■ License Information
■ Restores Factory Defaults
NOTE: The oven display will continue to show the original set
temperature and will not reflect the calibration offset. For example,
if set to 350° (177°C) and calibrated to -20, the display will
continue to show 350° (177°C).
ADJUSTMENT °F
(AUTOMATIC °C CHANGE)
10°F (6°C)
20°F (12°C)
30°F (18°C)
0°F (0°C)
-10°F (-6°C)
-20°F (-12°C)
-30°F (-18°C)

Sabbath Mode

The Sabbath mode sets the oven(s) to remain on in a bake setting
until turned off. A timed Sabbath mode can also be set to keep the
oven on for only part of the Sabbath.
When the Sabbath Mode is set, the allowed keypads are the
Power keypad and the Cancel keypads.
When the oven door is opened or closed, the oven light will not
turn on or off, and the heating elements will not turn on or off
immediately.
If a power failure less than 1 second occurs when the Sabbath
Mode is set, the oven(s) will remain in Sabbath Mode and
continue cooking.
For a power failure that lasts greater than a few seconds, the
oven(s) will return to an idle state and Sabbath mode will no
longer be active. For double ovens, the upper and lower oven
temperatures and cook timers can be set independently. If a cook
timer is set, the countdown will not appear. The timer will appear
frozen at the set time.
NOTE: Be sure to turn off your smart phone before the Sabbath or
holidays. If the phone is on and the oven control application
installed, oven changes will be displayed on your phone.
To Enable:
1. Touch the Power keypad, and then touch TOOLS.
2. Select SABBATH, and then touch NEXT.
3. Touch ON, and then touch SETUP.
NOTE: The programmed status of the oven(s) will be
displayed.
4. Touch CHANGE.
5. For single ovens, go to Step 6. For double ovens, select the
desired oven and then touch NEXT.
6. Select the desired oven temperature and touch NEXT.
(Optional) Set Bake Time (00:00) and touch SET.
or
Touch SKIP TIMER.
7. For single ovens, touch START. For double ovens, touch
START to begin Sabbath mode or touch CHANGE to edit the
current programming or to program the other oven.
To Disable:
Once activated, Sabbath mode can be deactivated on all cavities
by touching the Power keypad.
For single ovens, Sabbath mode can also be deactivated by
touching OVEN CANCEL.
COOKS FOOD
...a little more
...moderately more
...much more
...default setting
...a little less
...moderately less
...much less
6