Beper P302MAS100 Manual De Instrucciones página 9

On time (s) indicated switch-on time cycle in seconds (contraction).
Off time (s) indicates switch-off time cycle in seconds (relaxation).
* There are 2 individual rounds in cycle 3 and 6.
** The off-time is 10 seconds for every 2nd round in cycles 3 and 6.
To adjust pulse intensity, rotate the intensity selection knob (clockwi-
se to increase intensity, counter clockwise to reduce it). For heating
function, press the heating function key, the low heating setting will
activate (temperature between 38 and 41° C); by pressing the key
again, the max heating level will activate (temperature between 42
and 45°C); press the key once again to deactivate heating function.
To switch the device off, press the ON/OFF key for a few seconds,
until the blue LED indicator will turn off.
Note: the device automatically shuts off after 15 minutes of
continuous operation
Cleaning and maintenance
Make sure that the device is off and disconnected from USB cable
before proceeding with cleaning.
Remove any dust and/or stain found on the device using a soft cloth
slightly dampened with warm water.
Warning: do not immerse in water or other liquids; do not
use solvents or other detergents
Store the device in a cool, dry place, away from direct sunlight,
preferably inside its box.
Technical data
Lithium battery 900mAh
Input: 5V DC USB
For any improvement reasons, Beper reserves the right to mo-
dify or improve the product without any notice.
9
EN