Charger Maintenance; Exploded View; Learning - Beeper R5-CAMO Manuel D'installation

CHARGER MAINTENANCE

• The charger works only with the AC adapter dedicated to it. Using another adapter may damage the product.
• The adapter must be plugged into a household outlet and easily accessible.
• Do not cover, expose to a source of heat or humidity and use in a ventilated place.
• Please unplug your charger when not in use.
• Do not use your charger if it is damaged.
• The external flexible cable of this transformer cannot be replaced. If the cord is damaged, the transformer should be
scrapped.
• Never connect and disconnect the battery connection terminals while the power cable is still connected to the mains.
Always remove the plug from the socket first.
• Do not store your AC charger in low temperature areas. When it returns to its normal temperature, moisture can form
inside the device and damage the electronic circuits.
• Unplug the charger during lightning storms or when not in use for long periods of time to avoid damaging it.

EXPLODED VIEW

1. Mains charger connector
2. On / off button
3. Retractable footrests
4. Protective pad
5. Carry handle
6. Hull
7. Side LED strips
8. Battery life indicator

LEARNING

1. Charge your monowheel so that all the LEDs of the battery life indicator are green.
2. Inflate your tire using the valve extension (See p12)
3. Install the trainer wheels if you feel the need:
• Take the 2 learning rollers and a screwdriver.
• Unscrew the screws already present on the footrest
• Install the wheel in its location1. Charge your monowheel so that all the LEDs of the battery life indicator are green.
10
1
2
3
4
5
6
7
8