Lionelo care Thermup Go Manual Del Usuario página 5

Operating manual
1.
Pour boiled water into the bottle and then tightly fasten sleeve Velcros.
2.
USB cable must be connected to the sleeve and source of power
(charger/power bank/ USB port in the car).
3.
Temperature sensor:
•
Flashing red light (fig. B): temperature is too low (below 40°C),
•
Steady green light (fig. C): temperature is 40°C ~ 45°C, suitable
for the child,
•
Steady red light (fig. D): temperature is too high (above 45°C).
How to clean and maintain
1.
After every use and before cleaning, unplug the product. Before you
start cleaning, wait for the product to cool down.
2.
Clean the sleeve; to do so, wipe it with a wet cloth or paper towel.
Do not clean the sleeve under running water.
3.
Do not use strong cleaning agents.
The pictures are for reference only. The real design of the products may differ from
the pictures presented.
‑ 5 ‑ EN