Yedoo ALLOY Manual Del Usuario página 9

5.
Tighten the adjustment nut of the
quick release mechanism to the correct
position. When it is in the correct
position you will feel a noticeable
resistance just before you close the
mechanism completely. Close the quick
release lever in a position where it does
not touch the fork and simultaneously
it cannot be opened accidentally
while riding.
7a.
Installing the rear wheel (V-brake)
Release the brake cable from the guide
(1). Put the wheel in one of the two fork
dropouts (see 7b., 7c.) then centre the
wheel and tighten the quick release
mechanism (2).
9
6a.
5–6 Nm
Handlebars installation
Insert the handlebars on the stem
and tighten the screws of the sleeve.
The labels (not shown in a picture)
should be clearly visible from the
front view.
7b.
2
1
Two-position rear fork enables you to
adjust the height of the footrest above
the ground. The upper fork position,
which reduces the height of the footrest,
is designed for riding on a smooth, flat
surface. Riding will be less physically
demanding. The closed quick release
lever should point downwards.
Wolfer,
Wolfer RS
6b.
Trexx,
Trexx Disc
5–6 Nm
7c.
Use the lower position for riding over a
rough terrain. Close the quick release
lever. It should point upwards.
EN