Smart Start IN-HOM S.M.A.R.T. Mobile Manual De Usuario página 15

Smart Start, Inc.
an open test window, you will be required to provide another test.
Please see figure 4 for the proper facial position for testing.
13. Data Upload: This indicates that the device is connected
wirelessly and uploading test results and pictures. Testing is not
allowed during this time. DO NOT UNPLUG device at this time.
Unit will continue uploading data until all data has been
transferred.
14. Battery Low – Plug in Power: This means the battery is almost
dead. Please plug in power to charge the battery. Skipped tests
due to a dead battery are violations and will be reported.
15. Service Appt on MM/DD: A reminder, your appointment date is
approaching.
16. Service Lockout in ## hrs: A reminder of that you are due for
Service in ## number of hours. DO NOT IGNORE THE SERVICE
WARNING grace period.
17. Violation Lockout in ## hrs: A reminder of the number of hours
remaining before the unit goes into lockout due to violations. DO
NOT IGNORE THE VIOLATION WARNING grace period.
18. Service Lockout: The device is in lockout due to missing your
service date or other issues with the device. You are not able to
take a test and are required to call Smart Start at 800-880-3394
for further instructions on servicing your unit.
19. Violation Lockout: The device is in lockout due to excessive
violations. You will not be able to take a test and are required to
call Smart Start at 800-880-3394 for further instructions on
servicing your unit.
20. Error # Lockout in ## hrs: A message indicating that your
device has an error. The device will go into a service lockout
condition in ## of hours. Please call Smart Start at 800-880-3394
to arrange service.
21. Test Incomplete - Blow Harder: This means that you did not
blow long enough to finish the test. A retest is required. Wait for
the unit to display "Ready" or "Test Required – Please Blow" and
take another test. This time, blow longer and slightly harder.
22. Test Incomplete - Blow Softer: This means that you blew too
hard. A retest is required. Wait for the unit to display "Ready" or
"Test Required – Please Blow" and take another test. This time,
blow longer and softer (not as hard).
IN-HOM S.M.A.R.T. Mobile User's Manual
― 15 ―