Menu Functions; Low Power / Sleep Mode - Smart Start IN-HOM S.M.A.R.T. Mobile Manual De Usuario

IN-HOM S.M.A.R.T. Mobile User's Manual
Smart Start, Inc.
Temperature Operation
Your IN-HOM S.M.A.R.T. Mobile device will not allow a test if the
temperature of the device is below 50° F (10° C). Plugging in the
power supply will enable internal heaters that can speed up the time
required to reach operating temperature. If you are unable to plug in
power, make sure the device is in a room with temperatures above
50° F (10° C) and allow it to warm to operating temperature. Once
the device warms up, it will go to "Ready" or "Test Required – Please
Blow" and allow a test. Please note that any skipped tests due to the
unit being too cold will be reported as violations.

Menu Functions

Your IN-HOM S.M.A.R.T. Mobile device is equipped with some
basic menu functionality. To access these items, from the
main idle screen, press the "Select" key at top left part of the
keypad (see figure 5 below). Use the 'Up" and "Down" keys
to move up and down inside the menu structure. Use the
"Select" key to select specific items and use the "Exit" key to
exit out of particular screens.
Figure 5
NOTE: You will not be allowed to take a test while
accessing menu features and menu access is disabled
during an active test window.

Low Power / Sleep Mode

If your IN-HOM S.M.A.R.T. Mobile device is unplugged, it will go
into a low power / sleep mode. When in the sleep mode, the
LED's, beeper, and display will be off. You can wake up the unit by
pressing the "*", "0" or "#" keys on the keypad.
The IN-HOM
― 12 ―