Idiomas disponibles
Idiomas disponibles
mains power must be
disconnected before
mounting, changing,
removing accessories or
cleaning the appliance.
Wait for the motor to come
to a complete standstill
after switching off.
∙ The appliance must only be
operated with the original
accessories provided with
it and for the purpose
described.
∙ Inspect the grating and
cutting inserts for damage
before each use. Do not
use a defective insert.
Before using for the first time
Clean the attachment before using it for
the first time, as described in Cleaning and
Care.
Short operation
This appliance is designed with a short
operating time (10 mins), i.e. you can use
it for a maximum of 10 minutes in one go.
Then the unit needs to be switched off for
20 minutes to cool down.
Cutting / grating inserts
Cutting insert
For creating thin vegetable slices of
cucumbers or potatoes, for example.
Grating insert coarse/ fine
For grating vegetables, fruit, cheese and
nuts.
Operation
∙ Select the desired cutting/grating
insert and insert it into the multi-dicer
attachment.
∙ Push the locking ring firmly onto the
attachment and check that it is firmly
seated.
∙ Remove the cover on the front of the
food processor. To do this, reach into the
gap at the bottom of the cover.
∙ Place the attachment on the appliance
and lock it counter-clockwise. The filler
neck must point upwards.
∙ Place a tray under the locking ring.
∙ Insert the power plug into a wall socket.
∙ Set the control knob to the desired
speed level between 3 and 5.
∙ Place the prepared food in the filler neck
and press down lightly.
∙ Use only the plunger to refill the filler
neck.
After use
∙ After use, switch off the appliance and
disconnect from mains power.
∙ Unlock the attachment clockwise and
remove it. Remove the locking ring and
take out the insert.
∙ Replace the cover in such way that the
lines (− −) are opposite each other.
9
