REGULAR ROBOT CARE
To keep your robot running at peak performance and reliable, please perform the following
care procedures. If you notice the robot picking up less dust or debris from your floor, then
please empty the bin, clean the filter and the rolling brush. Cleaning the brushes is
important as hair or pet hair may get stuck and block it.
Recommended cleaning / replacement frequency :
Dust bin
Filters
Rolling brush
Side brushes
Brush guard
Rolling brush
Charging pins
Swivel wheel
Emptying the robot's bin
1.
Press the bin release button to
remove the bin.
Cleaning the robot's filter
1.
Remove the filter by grasping the
white tab.
Cleaning
After each use
Once every week
Once every week
Once every month
Once every month
Once every month
Once every month
Once every month
Replacing
-
Every 2 months
Every 6-12 months
Every 3-6 months (or when visibly
worn)
Every 3-6 months (or when the
silicone rubber strip on the brush
guard becomes visibly worn)
-
-
-
2.
Open the bin's hatch to empty it.
2.
Shake off debris by tapping the filter
against your trash container.
13
TKG RVC 1004 AB PB