AUTO KEEP WARM
/
indication above Keep warm. If there is no indication then there is no Keep warm after the program finish. You could switch off Auto Keep Warm at any moment of cooking process when you choose cooking
program, when program is running and when the program is over. To cancel Auto keep warm please keep pressed button
Note: In spite of the fact that Keep warm function is available for 2
Note: If temperature in any cooking program exceeds normal or stipulate then the appliance will automatically switch to Keep warm state and Keep warm indicator will go on.
WARM UP
If you need cooked meal to be warmed up press button
meal.
DELAY
Use this function to delay time of cooking process start. Press button
for minutes. Press start
(if cooking program is already chosen) or
PROGRAM CANCEL
Press button
to cancel selected program or settings.
TROUBLESHOOTING
Case
Dish is not cooked in time
Meal is burnt
Display shows E1
Display shows E2
Display shows E3
Display shows E4
/
function which means that Keep Warm function follows cooking program. If Auto Keep Warm follows cooking program you see
and button
(without any cooking program selection). Indication above Keep Warm starts going on and the multicooker will start warming up
. Display shows indication
some products could spoil. Please mind product features when you plan delay time.
Cause
There is no incoming power
There is no incoming power
The pot is set unevenly.
Heating plate is dirty.
There is a strange object between the pot and heating plate
Liquid and cereals disproportion
System error
Short circuit
System error
Short circuit
for 5 seconds.
for a long time. That may cause meal spoilage.
and time
will start flashing. Set up necessary time with buttons
to choose the program.
Check power
Check power
Set the pot evenly
Unplug the appliance and let it cool. Clean the heating plate.
Remove the object
Follow our proportions for water and cereals
Unplug the appliance, let it cool down. Contact authorized service center.
19
for hours
Solution