Tabla de contenido
CHEF PRO (TEMPERATURE AND TIME MANUAL SET UP AND SAVE FOR FURTHER USE)
You could either change cooking time and temperature settings in chosen automatic program or set up necessary
Change default settings before cooking process start
Choose necessary prog
You see default
In 5 seconds time indication
and preset time
change hours from 0 to 24 by pressing button
To change temperature settings wait till indication
increase temperature press
, to decrease -
When temperature and time are set up press
Change default settings in cooking program running mode
If you need to change cooking time and temperature in cooking process, press button
Time indication
and time
hours from 0 to 24 by pressing button
To change temperature settings wait till indication
Press button
and cooking process is going on.
Note:
, cooking process goes on in 30 seconds automatically.
Save user settings
CHEF PRO function saves automatically last used settings of cooking time and temperature. When you swich the multicooker on next time and choose program with manually changed settings you see your
settings on the display. For system recovery (to get default settings) press long button
temperature in all cooking programs. System recovery with button
10 minutes and 30 ) on the display.
start flashing. You could change time using buttons
. The interval is 1 hour and 1 minute. If you keep pressing the buttons
starts flashing. Set up temperature meaning with buttons
. If you keep the buttons
and
and cooking process will start.
start flashing in 5 seconds. You could change time with buttons
.
starts flashing. Set up temperature meaning using buttons
is possible only in stand-by mode or after pressing
and
and
and
pre
.
and
. You change minutes from 0 to 59 by pressing button
and
(5 seconds). Please mind that all your presets will be reset and you see default preset of time and
18
cooking start and when cooking process is running.
. You change minutes from 0 to 59 by pressing button
then interval is 5 hours and 5 minutes.
. Temperat
. To increase temperature press
, to decrease
in program running mode.
. You
. To
. You change
.
Tabla de contenido
