NuWave Brio 6Q Manual Del Propietário página 10

INSTRUCTIONS
• The unit will begin preheating to the set temperature.
• The LED display will show set cooking/preheat
temperature (flashing), pre, and temp.
• During preheat the cooking temperature can be
adjusted by using the [↑] and [↓] buttons above and
below the temperature icon.
• The cooking time can be adjusted also by pressing the
[↑] and [↓] buttons above and below the time icon.
4. When the unit reaches the preheat temperature the
unit will move into a five (5) minute hold. The unit will
maintain the preheat temperature during this five (5)
minute hold.
• During the five (5) minute hold the LED display will
show 5 (flashing), ready, and time and will beep one
(1) time.
• If no action is taken with in the five (5) minute hold, the
unit will automatically go into standby mode.
5. Place your food into the unit, slide the Fry Pan Basket
with Base Tray back into the Brio. The unit will begin
cooking at the set temperature and time.
6. The preheat cycle can be canceled anytime by pressing
the PREHEAT button. The unit will end the preheat cycle
and automatically go into the next cooking cycle.
7. When the unit is finished cooking the LED display will
show End and beep three (3) times.
STAGE
Stage cooking is used to cook food at different
temperatures and times throughout the cooking
process. Up to five (5) stages of cooking can be set
up. Delay, Preheat, Sear 1, Sear 2, and Warm are NOT
considered stages in the cooking process. Stage
1 cooking is the default (360F for 15-minutes). The
temperature and time can be adjusted.
1. Press the ON/OFF button. The LED display will show
360F and temp. This is Stage 1. Adjust the cooking
temperature and time using the [↑] and [↓] buttons.
2. To add additional stages, press the STAGE button one
(1) time. The LED display will show 360F, temp, stage,
and 2 (above stage). This is Stage 2 cooking.
18 18
instructions
3. Adjust Stage 2 cooking temperature and time by using
the [↑] and [↓] buttons.
4. To set additional stage cooking settings, repeat steps
2 and 3. The number above stage will change as you
continue to press the STAGE button and set temperature
and time. After Stage 5, if the STAGE button is pressed
again it will go back to Stage 1. The LED display will
show Stage 1 set cooking temperature, temp, stage, and
1 (above stage).
5. If you only want two (2) stages of cooking, leave the time
at 00:00 for stages 3~5 and those stages will be skipped.
6. Press the START/PAUSE button to begin cooking. The
unit will cook with the set parameters.
7. During cooking, press the STAGE button to see and
adjust upcoming cooking stages.
8. When the unit is finished cooking the LED display will
show End and beep three (3) times.
9. The STAGE button is also used to scroll through the
cooking function that have been set for a particular
recipe. Press the STAGE button, either before or during
cooking, to see and edit each function of the cooking
cycle as desired. This is explained later in this Manual.
Note:
• The LED display will only indicate the stage cooking
number when two (2) or more stages are used. The LED
display will not show stage number if only one (1) stage
of cooking is used.
• Stage 1 default: 360F, 00:15
• Stage 2~5 default: 360F, 00:00
• If no time is set for stages 2~5, those stages will be
skipped in the cooking cycle.
19 19
nuwavenow.com nuwavenow.com