Walker W300 Guia Del Usuario página 10

• When wall mounting the telephone feed
the line cord into the angled groove on
the back of the telephone and plug into
wall jack.
• Hold the Walker Clarity so that the holes
on the mounting bracket line up with the
raised mounting pins on the modular wall
jack. Once the holes are lined up, push
the phone in towards the wall jack and
then slide the phone downward until it is
securely seated on the wall jack.
• Plug one end of the handset cord
(coiled) into the bottom of the handset.
• Plug the other end of the handset cord
into the jack located on the lower left
edge of the Walker telephone and hang
up receiver.
10
W300_UGD_REVD_7.29.02
All manuals and user guides at all-guides.com
INSTALLATION
10
• When the phone is wall mounted the
handset knob will need to be reversed to
hold the handset in place. To reverse, pull
up on the knob and turn a quarter turn
clockwise. The knob will hold the handset
in place when you hang up.
• To convert phone from one mounting
position to the other simply depress the
tabs located above the feet on the mount-
ing plate and lift bracket off base of the
phone. Follow the instructions above for
positioning the bracket.
Avoid placing the unit where it will be
exposed to excessive heat or humidity.
8/1/02, 6:29 AM
Walker W300