Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN
DESCRIPTION
- Audio splitter - 1 mono input to 10 mono outputs or 1 stereo input to 5 stereo outputs.
- Allows audio signal to be distributed in audio systems, press conference splitters, etc.
CONTROLS AND FUNCTIONS
FRONT PANEL
1.- Device on/off switch.
2.- MODE: device operating mode selector. If the mono position is selected, 1 mono audio input will be
distributed to 10 mono outputs. On the other hand, when the stereo position is selected,
1 stereo audio input will be distributed to 5 stereo outputs.
3.- LED input signal level indicators.
4.- CH 1 OUTPUT/CH 2 OUTPUT: output volume controls.
REAR PANEL
1.- GND LIFT: switch to disconnect the ground from the device's earth socket to avoid ground loops when
the audio source is connected.
2.- CH 1 OUTPUT/CH 2 OUTPUT: audio signal outputs, XLR connectors.
3.- OUTPUT LINK: audio signal link outputs to connect another device in cascade, XLR connectors.
4.- CH 2 INPUT: audio signal input, combo connector (XLR and 6.3 mm jack).
5.- CH 1 (MONO) INPUT: audio signal input, combo connector (XLR and 6.3 mm jack). When the operating
mode selected is mono, connect the audio input signal here.
6.- Power supply cable connection.
7.- Power supply voltage selector.
- 2 -
Tabla de contenido
