Koenic KBT 200 Manual De Instrucciones página 17

Cleaning and care
When cleaning, never use solvents or abrasive
materials, hard brushes, metallic or sharp
objects. Solvents are harmful to human health
and can attack plastic parts, while abrasive
cleaning mechanisms and tools may scratch
the surface(s).
• After every use, please use the cleaning
10
brush to thoroughly brush and blow out
hair on the blades, attachment and the
beard trimmer.
• Clean the product's exterior surfaces with
a slightly damp cloth and then dry them
thoroughly.
• Make sure that no water enters the
product interior (for example, through
the switch). Keep the product in a dry,
cool location which is protected against
moisture and direct sunlight. Keep this
product out of the reach of children.
Troubleshooting
If there are any problems during operation, please refer to the following table. If problems cannot be
solved as indicated under Solution, please contact your manufacturer.
Problem
Product does not work
LED indicator does not light on
during charging batteries
Shaving head is not working
smoothly
IM_KBT200_150616_V05_HR.indb 17
All manuals and user guides at all-guides.com
Warning
Possible causes
• Interrupted power supply
• Batteries empty
• No power supply
• Power cord is not connected to
product or charging stand
• Device is not correctly put on
the charging stand
• Impurities accumulated on the
shaving head
Cleaning the shaving head
Switch off the product and take out the
11
battery. Push the shaving head with your
thumb until it is detached from the enclosure
and take it off. Brush the shaving head and
the product's interior with the cleaning brush.
Caution
Do not knock on the shaving head, this can
damage it.
Note
You can rinse out the shaving head under
water. Then dry it with a soft cloth.
When the shaving is clean and completely dry, fit
the shaving head onto the product. Ensure it's
firmly fit in.
Lubrication oil
In order to improve the cutting length, apply
12
1-2 drops of the oil onto the shaving head.
This is particularly recommended after
cleaning. Wipe off excess oil with a cloth.
Solution
• Check the power supply
• Re-charge batteries
• Check the power supply
• Check the power cord
connection
• Put product correctly on the
charging stand
• Clean and add 1-2 drops oil
onto the shaving head
English
17
16/6/15 5:39 PM