Front Panel; Back Panel - CyberHome DVR 1600 Manual

Front Panel

DVR 1600
DVD RECORDER WITH PROGRESSIVE SCAN PLAYBACK
1 DISC TRAY - Loads DVD+R/RW, DVD, CD-R/RW,
VCD/SVCD, MP3, JPG and other optical discs.
FRONT DISPLAY - The front Vacuum Flourescent
2
Display shows information about the unit's
operation, such as current chapter and elapsed
time during playback.
3
OPEN/CLOSE - Press to open or close the disc
tray.
PLAY/PAUSE - Begins playback of a disc, chapter
4
or track. Press again during playback to pause,
and again to resume playback.
5
RECORD - Begins a Live Recording.
ON / STANDBY - Turns the unit on and sends the
6

Back Panel

1
~100-230V
AC IN
POWER CORD SOCKET
1
of the power cord into the unit before connecting
the other end to the wall socket.
2
ANTENNA IN / OUT - For Antenna or Cable TV
connection. Passthrough connection to TV does
not transfer the output signal from the DVD
Recorder.
3 VIDEO INPUT 1 - Composite Video input for
recording. To select this input, use the SOURCE
button and choose VIDEO IN 1.
4 STEREO AUDIO OUTPUT
other audio equipment supporting Stereo Audio in.
5
COMPOSITE VIDEO OUTPUT
Output supported by most TVs.
6 S-VIDEO INPUT - S-VIDEO input for recording. To
select this input, press SOURCE and choose S-
VIDEO IN.
All manuals and user guides at all-guides.com
1
2 3
IN
OUT
AUDIO
INPUT 1
6 7
- Plug the matching end
- Connect to TVs or
- Standard Video
8
2
unit to standby mode. In standby mode, the unit
will use a minute amount of power to enable
power-on by the remote control.
7 DV IN - Front DV Input for recording. To select,
use the SOURCE key and select DV IN.
8
LEFT/RIGHT AUDIO IN 2
Inputs for recording. These inputs are shared with
the VIDEO IN 2 input.
9
COMPOSITE VIDEO IN 2
Video Input for recording. To select, use the
SOURCE key and select VIDEO IN 2. AV Inputs.
4
AUDIO
AUDIO OUTPUT
8 9
7
STEREO AUDIO INPUTS
1 or VIDEO IN 1 for recording.
8 COAXIAL DIGITAL AUDIO OUTPUT
special Coaxial Digital Cable to send the raw
coded digital signal to devices supporting digital
decoding.
S-VIDEO OUTPUT - Connect to TVs with S-
9
VIDEO in for better picture quality than standard
composite video.
10
COMPONENT/PROGRESSIVE SCAN VIDEO
OUTPUT - Use this output with TVs supporting
Component Video or Progressive Scan input for
best video quality. Select the PROGRESSIVE
SCAN MODE in the Recorder's SETUP MENU for
P-SCAN TVs.
Functions
5
3 4 6
/
RECORD STANDBY/ON
DV IN L AUDIO IN R VIDEO IN 2
7 8 9
- Front Stereo Audio
- Front Composite
5
Pr Cr
VIDEO OUTPUT
11 10
- Use with S-VIDEO IN
- Use a