Jimmy BX7 Pro Instrucciones De Uso página 6

2.Hold the dust cup and dust cup cover separately,
twist dust lid anticlockwise (Figure 2), remove it
from dust cup to clean. (Figure 3)
Filter and Cyclone Cleaning
Hold the cyclone in one hand, pinch the "UP" logo
with the other hand, and take out the filter (Figure
4).Please tap the filter downward.Do not tap the
filter in reverse side in case of filter clog(Figure
5).Clean the cyclone metal filter with the attached
mini brush.(Figure 6)
After cleaning the dust cup ,filter and cyclone,
assemble the cyclone into the dust cup. Rotate
the dust cup cover assembly into the dust cup
until a "click" sound is heard that is assembled in
place.(Figure 7)
Note:
1.Do Not miss the filter!
2.Use water or neutral reagents to clean dust cup and wipe
with dry cloths. Do not wash the filter until it is necessary.
Make sure the filter and dust cup are completely dry before
another use.
Brushroll Cleaning and Installation
Turn off the machine and unplug the power cord,
rotate the right lock knob anticlockwise with hand
from locked position to unlock position (Figure 8)
to remove the brushroll to clean up.(Figure 9)
After brushroll cleaning,install the brushroll and
the brushroll cover into the machine in turn(Figure
10) and lock the latch of the brushroll.(Figure 11)
Note: For safety reasons, please turn off the machine
and unplug power cord before cleaning brushroll.
4
2
Dust cup
lid
Dust cup
4
Marking
ribbon
MIF filter
6
Cyclone
metal
filter
Mini-brush
8
Lock Unlock
10
Install
Brushroll
assembly
Brushroll cover
3
Cyclone
5
Filter
7
Rotate dust
cup lid
9
Take
out
Brushroll
assembly
Brushroll cover
11
Unlock Lock