Tabla de contenido
Idiomas disponibles
Idiomas disponibles
(Original instructions)
The red on light (4) will come on. The display
•
screen (12) will show "ON".
Press the programmable button (9). The red on
•
light (4) will go off and the blue temperature se-
lection light (11) will come on. The number "50"
will flash on the display screen (12).
Select the desired temperature by pressing the
•
+ or temperature selection buttons.
You can select any temperature between 50o
•
and 95oC, in increments of 5oC.
Once you've selected the temperature, the
•
number indicated will flash for a few seconds
and then be memorised. The number shown
on the screen indicates the current temperatu-
re of the water.
The kettle may be turned off manually at any
•
time using the on/off switch (3). The appliance
will beep after 12 seconds of boiling.
When the water reaches the selected tem-
•
pe- rature, it will be kept at this temperature
for 2 hours. The kettle will switch itself on and
off automatically as necessary to maintain the
desired temperature.
After maintaining the temperature for two
•
hours, if the kettle has not been used it will go
into standby mode.
CLEANING
Disconnect the appliance from the mains and
•
allow it to cool before undertaking any cleaning
task.
Clean the electrical equipment and the mains
•
connection with a damp cloth and dry. DO
NOT IMMERSE IN WATER OR ANY OTHER
LIQUID.
Clean the equipment with a damp cloth with a
•
few drops of washing-up liquid and then dry.
Do not use solvents, or products with an acid
•
or base pH such as bleach, or abrasive pro-
ducts, for cleaning the appliance.
Neither parts of this appliance are suitable for
•
cleaning in the dishwasher.
HOW TO DEAL WITH LIME SCALE INCRUS-
TATIONS:
For the appliance to work correctly it should be
•
kept free of limescale or magnesium incrustati-
ons caused by the use of hard water.
To prevent this kind of problem, we recom-
•
mend the use of water with low lime or magne-
sium mineralisation.
However, if it is not possible to use the kind of
•
water recommended above, you should perio-
dically remove the limescale from the applian-
ce:
Every 6 weeks if the water is "very hard".
•
Every 12 weeks if the water is "hard".
•
A specific anti-lime scale product should be
•
used on this kind of product.
Homemade solutions are not recommended in
•
the decaling of this appliance, such as the use
of vinegar
EN
ES
Tabla de contenido
