Enter New Pin - Dedicated Micros Dennard 2040 Manual

4.4.4.2 NVM Services
The dome retains data about its current position, stored presets and tours, along with other data
which it requires for normal operation, in a Non-Volatile Memory device or NVM. Any loss or
corruption of this data will prevent the unit from operating normally. The following checks on the
device are available:
Reload Factory Defaults
Clear NVM Errors
Run NVM check
Return
Exit
Reload factory defaults' should not be used unless directed to do so by a trained technician. It will
reload all the default settings and delete all stored data such as preset positions, time and date etc.

4.4.5 Enter New PIN

The PIN number for the technician menu is pre-programmed but can be changed by the technician
through the following screen:
Enter new PIN _ _ _ _
0 1 2 3 4 5 6 7 8 9
Accept Entry
Clear Entry
Return Without Change
Key in your new PIN (password) and accept the entry.
Make a note of the new PIN number and keep it in a safe place
Dennard 2040 / 2060 Menu System Manual
All manuals and user guides at all-guides.com
Page. 26