Battery And Charging; Cleaning And Disinfection - MetaOptima MoleScope II Manual Del Usuario

Step 4: When the imaging session is over, pull to remove the MoleScope device, then gently
twist the universal attachment plate to detach it from your smartphone or tablet and place the
lid back on the sticky pad. Do not grab and lift the plate!
Permanent Attachment to a Smartphone or Tablet Case
If your device will be used frequently, you may peel off
the sticky pad from the universal attachment plate and
replace with provided double-sided tape. Repeat steps
2 and 3, then simply pull to remove the MoleScope
device. Only use the permanent adhesive on the case
and do not attach directly to your smartphone or
tablet.

Battery and Charging

We recommend that customers fully charge their device before their first use. Complete
charging duration is 90 minutes. Do not use the device while it is on charging mode. To
conserve energy, this product is designed to automatically turn off after 4 minutes. The battery
can be expected to supply multiple sessions. The device has a low battery indicator. If the light
indicator is flashing red, the battery is low and it may need to be recharged. To charge, plug the
device into a USB port. While charging, the charge indicator will glow red; when fully charged,
it will appear green. This product uses a special rechargeable lithium-polymer battery, which
is not replaceable.

Cleaning and Disinfection

The exterior and contact plate of your MoleScope should be cleaned by wiping with isopropyl
alcohol (70% vol.) or a disinfectant solution in between users. Turn the device off and
disconnect it from the charging cable before cleaning and disinfection.
Do not use alcohol or disinfectants in the optical areas of the unit.
Do not use abrasive material on any part of the equipment or immerse the device in
liquid. Do not autoclave.
This device lens should be treated as high-quality photographic equipment. It should be
cleaned with the provided microfiber cloth or an air duster, and protected from harmful
chemicals.
Troubleshooting
Your product is designed for trouble-free operation. There are no adjustments to be made nor
is any special servicing required. Never attempt to open the device for any reason.
8