Using Hands-Free Calling; Pairing Your Devices - BMW Motorrad Navigator IV Manual Del Usuario

Using Hands-free
Calling
Using Bluetooth technology, your Navigator
IV can connect to your mobile phone and
wireless headset/helmet to become a hands-
free device.
To determine whether your device with
Bluetooth technology is compatible with the
Navigator IV, go to www.garmin.com
/bluetooth.

Pairing Your Devices

Bluetooth wireless technology establishes
a wireless link between devices, such as a
mobile phone and the Navigator IV. The first
time you use two devices together, you must
"pair" them by establishing a relationship
using a PIN/passkey. After the initial pairing,
the two devices can connect automatically
each time you turn them on.
BMW Motorrad Navigator IV Owner's Manual
To pair and connect, your device and the
Navigator IV must be turned on and be
within 33 feet (10 meters) of each other. The
Navigator IV can be connected to a phone
and a headset at the same time.
Initiate pairing from your Navigator IV or
from your device. Refer to the instructions
for your devices.
When you turn on the Navigator IV, it tries
to connect to the last device to which it was
connected. You might have to set your device
to connect to the Navigator IV automatically
when it is turned on.
When your phone is connected to your
Navigator IV, you are ready to make phone
calls. From the Menu page, touch
access the Phone menu.
Pairing Your Phone Using the
Phone
1. From the Menu page, touch
Settings > Bluetooth
2. Enable the Bluetooth component on your
phone. This might be in a menu called
Settings, Bluetooth, Connections, or
Hands-free.
3. Initiate a search for Bluetooth devices.
4. Select the Navigator IV from the list of
devices.
5. Enter 1234 into your phone.
Pairing the Navigator IV with
Your Mobile Phone
1. From the Menu page, touch
Settings > Bluetooth
Phone to
2. Under Phone, touch Add.
3. Enable the Bluetooth component on your
phone. Enable Find Me/Discoverable/
Visible mode. These settings might be in
a menu called Bluetooth, Connections, or
Hands-free.
4. Touch OK on the Navigator IV.

Using Hands-free Calling

E
N
Tools >
> Enabled.
Tools >
> Enabled.