Wired Connection - nedis WIFICDP30WT Guia De Inicio Rapido

• Consult the local laws and regulations for this product before installing and
using.
Charging the product through micro USB
1. Plug the micro USB cable A
2. Plug the other end of A

Wired connection

1. Loosen the screws of the external power input A
2. Hold one of the 8 - 24 VAC wires behind the metal plate of A
3. Tighten the screw of A
4. Hold the other 8 - 24 VAC wire behind the other metal plate of A
5. Tighten the last A
connection.
Mounting the product (image B)
1. Hold the bracket A
2. Use A
2 to mark the drill locations with a pencil.
3. Remove A
2
wall type.
4. Insert the plugs A
5. Use the 4 screws A
Making video recordings and screenshots
Optional: insert a microSD card (not included) into the microSD card slot
4
A
, to locally store recordings.
w
You can make video recordings and screenshots on your phone, by tapping
Record and Screenshot.
Playing back motion detected videos
Motion detected videos are automatically saved on the SD card. (If inserted in
the camera).
1. Tap Playback to open the stored videos.
2. Select the day of the recording.
3. Zoom and drag the timeline to select the recording.
into the micro USB port A
q
q into a 5.0V/1.0A USB adapter (not provided).
t to connect the wire to the doorbell.
t screw to complete connecting the 8 - 24 VAC
against the wall where you want to install the product.
2
and drill the holes, using a drill with appropriate drill bit for the
into the holes.
o
to fasten A
i
t
2 to the wall.
6
4 .
.
.
t
.
t