General Troubleshooting - AKASO D2000 Manual De Instrucciones

- Record Audio: off/on (Default: on)
- Date Stamp: off/on (Default: on)
- G Sensor: off/low/medium/high (Default: medium)
- After setting, please press OK again to be back to video shooting mode.
• System settings
- Please press OK first before entering system settings
- Press Menu button twice to start system settings. Press Up and Down buttons to select
each setting, and press OK to confirm.
- Date/Time
- Plate Number: Enable this feature to enter your vehicle plate number for video recording.
The plate number will stamp in the video.
- Auto Power Off: off/1 minute/3 minutes/5 minutes
- Parking Monitor: off/on (default: off)
Enabling this feature will activate the camera if your car is bumped or moved to
automatically record hit-and-runs and automatically lock and save any video file that was
recorded.
- Beep Sound: off/on (default: on)
This setting allows you to turn the device's button sound effect on or off.
- Language
- Frequency
- Backlight: off/1 minute/3 minutes/5 minutes
- Format: to format your Micro SD card
- Default setting
- Version
- After setting, please press OK again to be back to video shooting mode.
• Set Emergency Save
- Press Emergency Save button, and press the button again to quit Emergency Save.
• Picture Taking
- Press Mode button to enter Picture Taking Mode
- Press OK to take pictures
• Video and picture Playback
- Please press OK first before entering video and picture playback
- Press Mode button to enter Playback Mode
- Use Up and Down buttons to browse files, and press OK to watch.
- Press Menu button to lock and unlock current file, and long press Menu button to delete
the files.
- After setting, select video shooting mode and press OK again to be back to video
shooting.
• Data backup and download
- Connect the camera to the computer through USB cable. You can download the files in
removable disk appearing in "My Computer" of your personal computer.
All manuals and user guides at all-guides.com
3
- You also can insert the Micro SD card into a card reader to download files into your
personal computer.
• Battery Indicator
- The battery indicator is located at the right end corner of the screen. If the red cross sign
comes up, please charge your dash cam immediately.
Precaution
AKASO Dash Cam is not intended to be modified, or calibrated while
operating a vehicle. AKASO is not responsible for any damages resulting from the
user's misuse of the camera.
Use only manufacturer-approved chargers, accessories, and supplies.
AKASO cannot be responsible for the user's safety when using accessories or supplies that
are not approved by AKASO.
Do not store your device in excessively hot, cold, damp or dry locations.
Doing so may cause the screen to malfunction, result in damage to the device, or cause the
battery to explode. Your device is recommended for use within a temperature range of -4º
to 131º F (-10º to 55º C), and a humidity range of 10% to 80%.
If your device becomes overheated, allow it to cool down before use.
Prolonged exposure of skin to an overheated device may cause low-temperature burn
symptoms, such as red spots or areas of darker pigmentation.
Do not touch the car charger with wet hands or disconnect the charger by pulling the
cord. Doing so may result in electrocution.
Do not use damaged power cords or plugs, or loose electrical sockets.
Faulty connections can cause electric shock or fire.
Do not touch your device with wet hands.
Doing so may cause electric shock.
Do not remove the SD card from the product during data recording,
which may cause an Error.
Always keep the camera lens clean, and ensure that the lens is not blocked by any
object or placed near any reflective material.
If the car's windshield is tinted with a dark coating, recording quality may be affected.

General Troubleshooting

Problem: All buttons are not responding
Solution:
1. Press the RESET button to restart the camera
2. Reformat Micro SD card or replace with a new card
4