Controls And Functions; Front Panel; Rear Panel - FONESTAR TSI-40-512 Manual Del Usuario

EN
DESCRIPTION
UHF transmitter for desktop or installing in 1 U 19" rack.

CONTROLS AND FUNCTIONS

FRONT PANEL

1.- Headphone output volume control.
2.- PHONES: headphone output for monitoring the signal to be transmitted.
3.- Information display: shows information about the input and output signals, frequency, etc..
A. RF: radio frequency signal level indicator.
B. AF: audio signal level indicator.
C. FREQ: indicates that the information shown in the display is the transmission frequency.
D. CHAN.: indicates that the information shown in the display is the transmission channel number.
E. Configuration information.
F. MUTE: indicates that the signal is cut off during the configuration of new parameters.
4.- SET: allows selection among the following configuration options: channel number and its associated
frequency (from CH1 to CH32), RF transmission level (low, mid or high) and configuration
LOCK/UNLOCK.
5.- w/s: allow the required options to be selected Iin order to configure the transmitter.
6.- L: wireless transmitter left channel volume control.
7.- R: wireless transmitter right channel volume control.
8.- POWER: transmitter on/off switch.

REAR PANEL

1.- Power supply
2.- AF-IN (STEREO): line level signal input, 3.5 mm stereo jack connector.
3.- AF IN (R): microphone/line signal input, 6.3 mm mono jack connector.
4.- AF IN (L): microphone/line signal input, 6.3 mm mono jack connector.
5.- Gain selector in the inputs AF IN (L) and AF IN (R).
6.- TX-ANT: antenna connector.
- 2 -