Connecting Machine To Power Source - Dressmaker 150 Manual De Instrucciones

Connecting machine to power source

Connecting the machine
1. Connect the machine to a power source as illustrated, then light on.
2. Turn on the power switch.
Attention:
Consult a qualified electrician if in doubt as to connect machine to
power source.
Unplug power cord when machine is not in use.
The appliance must be use with the AC adaptor that input 120V AC 60Hz
15W and output 5.2VDC 800mA.
All manuals and user guides at all-guides.com
Foot control
With the sewing machine turned off, insert the
foot control plug into its connector on the
sewing machine. Turn on the sewing machine,
and then slowly depress the foot control to
start sewing. Release the foot control to stop
the sewing machine.
3
STOP START