Difrax S Instrucciones De Uso página 52

3) Screw the S-bottle ring (III) and teat (II)
on the bottle body (v)
Important: When you warm up the
bottle, do not seal it with the S-bottle
non-spill cap (I) or with the sealable
disk (Iv). This due to the build-up of
pressure inside during heating
4) Place the entire unit in the base
station and press firmly in place
G
5) To switch on the S-bottle warmer, press
and hold the operating button
at least 3 seconds until it flashes red and
you hear a beep sound
6) Once the contents of the bottle has
reached the temperature of 37 °C * the
S-bottle warmer will automatically switch
off. you will hear 3 beeps and the
operating button will turn green.
I
Heating should take approx. 3 minutes
depending on the ambient temperature
and the temperature of the food
7) Remove the bottle from the base
station
G
* +/- 2 °C
for
I
8
8) During feeding, the
protective cap can be
F
placed on the bottom of the
heating element ;
C
this protects the contact rings
9) Shake the bottle a few times to
spread the heat evenly
10) Test a few drops on the inside of your
wrist before feeding your baby to ensure
that the food is at the correct temperature
11) you can feed your child directly with the
S-bottle including heating element and
bottle base; these do not need to be
disassembled first
The O-ring valve with vacuum system
B
ensures that all the advantages of the
S-bottle are retained, so that your baby has
less trouble with burping, vomiting
and colic
9