Assembling The Difrax S-Bottle Warmer; How To Use The Difrax S-Bottle Warmer; Important - Difrax S Instrucciones De Uso

Assembling the Difrax S-bottle warmer

1) Place the base station on a stable
G
surface
2) Insert the plug into the wall socket
H
3) Unscrew the bottom with the s-bottle
valve from the S-bottle (vII and vI). These
items you don't need anymore when you
directly feed after warming-up because all
the advantages of the vacuum system in the
bottom of the S-bottle warmer are pr0cessed
4) Press the O-ring valve firmly onto the
B
heating element in the notch with the
C
raised section facing upwards in order to
prevent leakage. Make sure the upstanding
part is open by squeezing it several times
5) Place the heating element
C
base of the correct size or
D
sure the O-ring valve is still firmly in place
: White bottle base for S-bottle Natural
D
170 ml and 250 ml
: Black bottle base for S-bottle Wide
E
200 ml and 310 ml
in the bottle
and make
E
6
6) Screw the S-bottle body (v) firmly in place
on the bottle base or
D E
7) Unscrew the bottle ring with the teat and
sealable disk (III, II and Iv) from the bottle
body (v)

How to use the Difrax S-bottle warmer

1) Fill the S-bottle via the top with (breast)milk
or water
2) Because the heating element
space in the bottle, the S-bottle holds 30 ml
less food than indicated on the volume
indicator! Use the top-up cap
the missing 30 ml, fill the cap
this to the food already in the S-bottle

Important:

• Do not heat frozen (breast)milk or frozen water in the S-bottle
warmer. Frozen food must be defrosted thoroughly first before
it can be heated
• Warm up (breast)milk or water first before you add your
(milk or porridge) powders
• The minimum amount of food you can warm up is 90 ml
takes up
C
to top up
A
and add
A
7