Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Airfusion Peregrine Installation Instructions
INSTALLATION OF BLADE (Fig. 8)
1. Install the fan blade to the fan assembly by tightening the 2 screws.
Ensure all screws are tightened evenly to reduce the chance of warping or unbalancing.
Take care not to over tighten the screws, as this can damage the blades
2. Repeat the same process for the other blades.
NOTE: Don't run the motor without blades installed!
INSTALLATION OF Lamp (optional) (Fig. 9)
• Install the lamp on the fan assembly then secure it by turning clockwise.
Do not exceed the maximum power rating
4 | P a g e
INSTALLATION OF THE FAN
Fig. 8
Fig. 9
Tabla de contenido
