CONCORD 3045 Guia De Inicio Rapido página 9

18
SOFTWARE INSTALLATION (WINDOWS)
1. Insert the CD-ROM included in your camera's packaging into your computer's CD-ROM drive.
2. The installation screen will pop up automatically.
• If the installation screen does not appear automatically, double click on My
Computer on the Desktop or in the Start Menu,and locate the CD-ROM
Drive, then double click on the CD-ROM Drive icon for installation.
3. Click the Install button to start installation.
• The selected software item for installation is marked by a red check mark,
clicking the red check mark will deselect the selected item.
4. Follow the on-screen instructions to complete the installation.
Note:
1. The camera driver (CAM-IN SUITE III) must be installed under all operating systems to enable the camera as
a mass storage device (USB) in Windows 98/98SE and to enable the video driver for all operating systems.
2. Remember to restart your computer after the installation of the camera driver so as to ensure its successful
installation.
19
DOWNLOADING PICTURES / VIDEO CLIPS ONTO YOUR COMPUTER
Note: Do not connect the camera to the computer before the camera driver installation is completed.
1. Install the camera driver included with the bundled CD-ROM. (for the first time connecting the camera to the
computer.)
2. Turn the Mode Dial to any modes except the PC Cam mode.
3. Connect the supplied USB cable to the computer's USB port.
• Do not turn the Mode Dial to the position of the PC Cam mode.
4. Turn on the camera.
• Mass Storage is displayed on the LCD.
5. Open My Computer or Windows Explorer. A "Removable Disk" appears in the drive list.
6. Double-click the "Removable Disk" icon to view its contents.
7. Files stored on the camera are located in the folder named "DCIM".
20
USING THE CAMERA IN PC-CAM MODE
Note: Do not connect the camera to the computer before the camera driver installation is completed.
1. Install the camera driver included with the bundled CD-ROM. (for the first time connecting the camera to the
computer.)
2. Turn the Mode Dial to the PC Cam mode.
3. Connect the supplied USB cable to the computer's USB port.
4. Open the web conferencing application, such as NetMeeting. Follow the application's on-screen instructions,
or refer to its Help section for operating.
Note:
When the Mode Dial is set to the PC Cam mode, and the camera is connected to your computer for the first time
after the installation of the camera drivers from the supplied CD-ROM, the computer will recognize and install
the camera onto the computer, during the installation, the messages prompting you to select may occur and vary
All manuals and user guides at all-guides.com
7