Setting The Flash - CONCORD 3045 Guia De Inicio Rapido

6

SETTING THE FLASH

Pressing the FLASH button cycles through the flash modes. The flash can be used in Auto
photo modes, but not in Video
The following list describes each flash mode:
Auto Flash
A
Always on
Off
7
USING THE ZOOM
In Auto or Manual mode, press
to zoom out from the subject. To turn the zoom off, keep pressing
Note:
1. The digital zoom is used to achieve magnification levels up to 4X.
2. The digital zoom doesn't work in the Video Mode.
8
CLOSE-UP SHOOTING
1. Turn the Mode Dial to
2. Slide the Macro Switch to
• The Macro icon
3. Frame the subject in the LCD.
4. Press the Shutter button to take the picture.
9
TAKING CONTINUOUS PICTURES
1. Turn the Mode Dial to
2. Press the Continuous Shot (
3. Press the Shutter Button to capture the pictures.
All manuals and user guides at all-guides.com
mode. The flash mode icons appear in the LCD.
the camera detects ambient lighting conditions, and the flash
fires if it detects insufficient light.
the flash fires regardless of ambient lighting conditions.
the flash is off.
to display the zoom bar and zoom in on the subject, press
Press to zoom in for a
telephoto shot (subject
appears closer)
Press to zoom out for
a wide-angle shot (subject
appears further away)
Auto or Manual mode.
.
will appear on the LCD.
Auto or Manual Mode.
) Button. The Continuous Shot icon (
.
x2.6
Shutter button
) will appear on the LCD.
4 4
and Manual
Displays the zoom ratio