DJI MINI 3 PRO Fly More Kit Guia Del Usuario página 5

EN
DJI Mini 3 Pro Two-Way Charging Hub
1. Status LEDs: The status LEDs display battery levels for three seconds after
the batteries are inserted into the charging hub. The LEDs in an array blink
successively during charging and change to solid green after the corresponding
battery is fully charged.
2. Function Button: Press to check the battery power level. When both the
intelligent flight battery and an external device are connected for charging, the
battery will be charged before the external device. Press and hold the function
button for two seconds to switch the charging priority.
Place the charging hub on a flat and stable surface when in use. Make
sure the device is properly insulated to prevent fire hazards.
DO NOT attempt to touch the metal terminals on the hub. Clean the metal
terminals with a clean, dry cloth if there is any noticeable buildup.
Visit https://www.dji.com/mini-3-pro/downloads and refer to the DJI
User Manual for more information.
Specifications
Model Number
Supported Charger
Input (USB-C)
Output (USB)
Operating Temperature
DJI Mini 3 Pro Propellers
Mount the marked propellers to the marked motors and the unmarked
propellers to the unmarked motors.
Use the screwdriver provided in the aircraft package to remove and
install the screws. Unsuitable screwdrivers may damage the screws.
Use the new screws provided with the propellers when installing. DO
NOT reuse old screws.
Use two propellers from the same package. DO NOT mix with propellers
from other packages.
DJI Mini 3 Pro Intelligent Flight Battery
Specifications
Model Number
Capacity
Max Charging Power
Battery Type
Chemical System
Charging Temperature
4
CHX162-30
USB Power Delivery charger
5 V 3 A, 9 V
5 V 2 A
5° to 40° C (41° to 104° F)
(Figure B)
BWX162-2453-7.38
2453 mAh
37 W
Li-ion
LiNiMnCoO2
5° to 40° C (41° to 104° F)
(Figure A)
3 A, 12 V 3 A
Mini 3 Pro
TM