Tabla de contenido
EN
CONTROLS & TROUBLESHOOTING
PLEASE VISIT HTTPS://WWW.CATIT.COM/HELP-ADVICE/ FOR THE LATEST INFORMATION AND GUIDES.
CONTROLS / AUDIO
Touch
Touch
<
Controls
Controls
Previous
O
Confirm
>
Next
Audio
Three short beeps
Short beep
Series of short beeps
(1 minute)
TOUCH CONTROL PANEL / MANUAL OPERATION
STEP 1. UNLOCK
The LCD touch
NEXT
control panel will
lock automatically
after 20 seconds of
inactivity. To unlock,
tap '<' and '>' at the
2
same time.
STEP 3. SCHEDULE MEALS
Tap 'O' so that number 1 is blinking. Tap on 'O' again to set the meal time (same process as in
step 2.) Confirm with 'O' and tap '>' to set the next meal. Repeat for up to five meals, or press
and hold 'O' to save and exit.
1
40
Tap to make the feeding tray instantly rotate clockwise by one
compartment. Press and hold to adjust scheduled meals.
When scheduling meals, tap to select a meal number or to reduce
the hours/minutes when setting the time.
Double tap to set the current time. Tap once to schedule meals.
Press and hold for 5 seconds to restore the device to default factory
settings (this will clear all scheduled meals).
When scheduling meals, tap to switch between hours and minutes.
Press and hold to return to the main interface.
Tap to make the feeding tray instantly rotate counterclockwise by
one compartment. Press and hold to adjust scheduled meals.
When scheduling meals, tap to select a meal number or to increase
the hours/minutes when setting the time.
Feeding successful (can be enabled/disabled in the mobile app)
At press of any key on touch control panel
Back-up battery is running low
STEP 2. SET CURRENT TIME
Double tap 'O'. The HOUR digits will start
NEXT
blinking. Use the '<' and '>' controls to set
the hour and tap on 'O' to confirm.
Repeat this process when the MINUTE
digits are blinking.
1
START
1
2
Note: The first compartment of the feeding tray is open by default and does not require scheduling. This means
scheduled meal number 1 corresponds with the first rotation of the feeding tray (= food in 2nd tray compartment).
Scheduled meal number 2 corresponds with the second rotation (= food in 3rd tray compartment), and so on.
Battery saving feature: After 5 minutes of inactivity, the LCD screen will turn off to save power. Touch any key on the control panel
to turn it on again.
Power off: When the feeder is turned off, and turned on again, scheduled meals are saved but time settings will be lost. Reconnect
to Wi-Fi/app to automatically synchronise time settings, or enter the time manually using the touch control panel.
TROUBLESHOOTING
Problem
Possible solution / effect
The feeding tray has stopped moving
If the tray can't move (jammed by an obstruction, or when met with
other kind of resistance), it will rotate in reverse and stop. The display
will count down from 60 seconds and then the feeding tray will rotate
again.
I've inserted the ice packs but now the
Please check if you have inserted the ice packs correctly (nubs pointing
top cover won't close
upward, see installation section).
The touch control panel is unresponsive
The LCD touch control panel will lock automatically after 20 seconds of
inactivity. To unlock, tap '<' and '>' at the same time.
My Wi-Fi / Internet is down, will the
The feeder will continue to operate according to the schedule that
feeder still serve food as scheduled?
was set when the connection was still active. The schedule can still be
adjusted using the LCD touch control panel.
3
4
5
41
Tabla de contenido
