STACK-ON PS-1808-E Manual De Instrucciones página 4

Secure the safe to a wall stud, and to a
permanent shelf or floor, using the predrilled
moun�ng holes in the safe.
NOTE: The safe must be secured to a wall stud
on one side of the safe in the top and bo�om
holes in the back of the safe so that it is
anchored to the wall stud in two loca�ons. Wall
anchors should be used on the other side. The
safe should also be mounted to a permanent
shelf or to the floor. Use the hardware provided
or consult your hardware retailer for fastening
hardware for your par�cular moun�ng surfaces.
Mark the holes to be used. Drill the appropriate
diameter and depth of pilot holes depending on
the type of hardware being used and the
moun�ng surface.
Secure the safe with the fasteners. (Figure 2)
Figure 2
KEY HOOKS
Key hooks can be used to organize keys
as shown below
MAINTENANCE
Tools Required:
Phillips screwdriver
5mm Allen wrench
If the door of the safe starts to rub on the
door frame, open the door per the
instruc�ons above.
By the door hinges you will find a threaded
stem. Use an Allen Wrench to �ghten the
threaded stem. This will realign the door.
IMPORTANT
Keep keys and your combina�on number in a secure
place, away from children. Keep this record of your
serial number and combina�on in a secure place
separate from your safe. To order a replacement key
set, visit:
h�ps://www.stack-on.com/key-replacement-form/
Cannon Security Products
2895 W. Capovilla Ave, Suite 140
Las Vegas, NV 89119
© 2022 Cannon Security Products
KEY HOOKS
4
12
40787-2205