Technical Data Sheet - IRUDEK LIGHT PLUS 1 Instrucciones De Uso

i)CE marking indicating that the item complies with the requirements of the EU
2016/425 PPE Regulation.
ii)Manufacturer's identification
iii)Article reference
iv)Batch or serial number
v)Year of manufacture
vi)Material
vii)Size
viii)European Standard
(ix) Notified body number
(x) Pictogram indicating the need for users to read the instructions for use
INSTRUCTIONS FOR PERIODIC INSPECTIONS
Regular periodic inspections should be carried out. The safety of the user depends
on the continued effectiveness and durability of the equipment.
Personal protective equipment must be serviced at least every 12 months. Periodic
inspections may only be carried out by the manufacturer or a person authorised by
the manufacturer. All parts of the equipment must be carefully inspected for signs
of deterioration, excessive wear, corrosion, abrasion, cuts and usage defects. At the
end of a periodic inspection, the date of the next inspection is determined.
Observations should be recorded on the equipment control card.
Check the legibility of the product marking.
CONTROL SHEET
The control sheet must be filled in before the first delivery of the equipment for use.
All information concerning the personal protective equipment (name, serial number,
date of purchase and date of first use, user name, history of periodic inspections
and repairs, and next date of periodic inspection) must be recorded on the
equipment control sheet.
Do not use personal protective equipment without the control card duly filled in.
IDENTIFICATION
REFERENCE
BATCH NUMBER, SERIES
YEAR OF MANUFACTURE
CAN BE USED WITH DATE OF PURCHASE
DATE OF FIRST COMMISSIONING
USER NAME
COMMENTS

TECHNICAL DATA SHEET