LBX instruments WB-Pro Manual De Instrucciones página 10

start countdown.
The countdown settings are independent of the temperature settings. When
6.
setting the countdown, take into account the time required to achieve the set
temperature.
The countdown timer setting as following procedures: For example:
Set the countdown time from 0 to 10 min.
Operation Display
°C
Cdt
OFF
010.
9.57
5.8 Setting the dry-start protection alarm
When the dry-start protection function is on, the bath will stop heating and an
alarm will sound when the system detects that the inner chamber is in dry-start
status. When the dry-start protection is off, there is no protection alarm and the
bath will continue heating to the set temperature.
For example:
the current temperature is 37.0°C, set the dry-start protection from "ON" to "OFF";
Operation Display
°C
OPA
On
Select the menu option
Navigate to the countdown timer selection menu
option
Press set key to enter the countdown timer setting
If the countdown time is 0, it displays OFF.
If not, it displays the countdown timer value
Set the countdown time you require
The "." In the lower right corner means that it is in
countdown timer setting
Press set key to save the setting
The countdown timer will begin once you save the
setting
The setting will exit automatically after 5S without
operation
Select the menu option
Select the dry-start protection setting menu option
Press set key to enter the dry-start protection
setting. The default setting is "ON"
10