Beem Fresh-Aroma-Perfect Superior Manual De Instrucciones página 27

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

29
9. Press the button
erating lamp lights up and the display (15) shows
through the grinder shaft into the fi lter compartment and then hot water is poured over it to
brew it.
If the brewing process is to be aborted prematurely, press the
lamp goes out and the device is switched off.
At the end of the brewing process, you will hear three beeps,
device automatically switches on the hotplate or to stand-by mode (depends on the variant, see
the "Handling and Operation" chapter – "Hotplate").
The hotplate switches off automatically after 35 – 40 minutes and the device switches to stand-by
mode. The operating lamp
Making Coffee with Coffee Powder
1. If necessary, fi ll the water tank (6) with water (see the "Handling and Operation" chapter –
"Filling the Water Tank").
2. Open the fi lter compartment (11) by pressing the release button for the fi lter compartment (4).
3. Insert the permanent fi lter (10) or a basket fi lter paper (see the "Handling and Operation"
chapter – "Inserting the Filter").
4. Add the quantity of coffee powder you want to the fi lter using the measuring spoon which is
supplied with the device or another suitable spoon. We recommend one heaped spoon for
each 125 ml cup.
5. Close the fi lter compartment.
6. Set the desired number of cups with the button
tion" chapter – "Setting the Number of Cups").
7. Set the coffee strength you want with the button
ation" chapter – "Setting the Coffee Strength").
8. Press the button
the display (15) shows
If the brewing process is to be aborted prematurely, press the
lamp goes out and the device is switched off.
At the end of the brewing process, you will hear three beeps,
device automatically switches on the hotplate or to stand-by mode (depends on the variant, see
the "Handling and Operation" chapter – "Hotplate").
The hotplate switches off automatically after 35 – 40 minutes and the device switches to stand-by
mode. The operating lamp
(14) to switch on the grinder and start the brewing process. The op-
goes out.
(
(16) to start the brewing process. The operating lamp lights up and
. Hot water is poured over the coffee powder to brew it.
goes out.
. Freshly ground coffee is transported
button. The operating
goes out on the display.
goes out on the display and the
(19) (see the "Handling and Opera-
(20) (see the "Handling and Oper-
button. The operating
goes out on the display.
goes out on the display and the
EN
Tabla de contenido

Solución de problemas

loading

Tabla de contenido