FONESTAR AIP-GO Guía Rápida página 2

EN
The AIP system uses free control and confi guration software. Download the AIP-GO program at the following
link: https://fonestar.com/aip-go
REQUIREMENTS
There are 2 requirements, notes to be taken into account in the AIP-GO programme, and a fi nal consideration
for the interconnection and use of the AIP system in an ideal way:
IP ADDRESSES
All devices on the network must have an IP address, including the PC. For this purpose, all the devices
have the DHCP protocol activated in their factory confi guration. This speeds up the confi guration as the IP
addresses will be assigned to the devices automatically.
NOTE: this automatic assignment will only occur if there is a DHCP server on the network (any router by
default has this functionality).
If you do not have DHCP equipment for the automatic assignment of IP addresses or you want to do it
manually, you must confi gure a fi xed IP, you must do it in each of the equipments of your AIP system. To do
this, follow the steps described below:
PC
-
- Windows: go to the system network settings.
- AIP-3010:
Via buttons and display:
- Press OK button to access the menu.
- Select SETUP and press OK.
- Select NETWORK/CONNECTION and press OK.
- Select NETWORK and press OK.
- Select EDIT and press OK.
- Select FIXED IP and press OK.
- Confi gure IP address, subnet mask, gateway and click OK.
- AIP-GATE, AIP-1020, AIP-4010 and AIP-SPL:
Use the OFFLINE CONFIGURATION tool of the AIP-GO.
- Go to the top menu GENERAL/ADVANCED/OFFLINE CONFIGURATION....
- Check the CHANGE NETWORK CONFIGURATION box and follow the process described in the
same window.
- 2 -