Maintenance; Nozzle Maintenance; Transportation And Storage; Move The Machine - GreenWorks Pro PW60L00 Manual Del Usuario

Ocultar thumbs Ver también para PW60L00:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

13

MAINTENANCE

CAUTION
Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
CAUTION
Do not use strong solvents or detergents on the plastic
housing or components.
WARNING
Remove the battery pack from the machine before
maintenance.
13.1

NOZZLE MAINTENANCE

20
If there is too much pump pressure, the nozzle can become
clogged, you can feel a pulsing sensation while you pull the
gun trigger.
13.1.1 REMOVE THE NOZZLE
1. Remove the nozzle (19) from the spary wand (8).
13.1.2 CLEAN THE NOZZLE
1. Use a straight paper clip or cleaning tool (20) to clean the
spray tip.
2. Flush and clean the unwanted materials out of the nozzle
(19) with the garden hose (15).
3. Install the clean nozzle (19) to the spray wand (8).
English
14
TRANSPORTATION AND
STORAGE
Remove the battery pack from the machine before

transportation and storage.

14.1

MOVE THE MACHINE

Point the spray wand in a safe direction.
Only hold the machine with the handgrip.
14.2

STORE THE MACHINE

Make sure that the gun, the high pressure hose and the
pump are dry.
Make sure that children cannot come near the machine.
19
Use a recommended pump protector to prevent cold
weather damage during storage in winter.
Disconnect the garden hose from machine.
Wind the high pressure hose.
Clean housing and the plastic components with a moist
and soft cloth.
Make sure that the machine does not have loose or
damaged parts. If it is necessary, do these steps/
instructions:
replace the damaged parts.
tighten the bolts.
speak to a person of an approved service center.
Store the machine in a dry, isolated and frost-free area.
15

TROUBLESHOOTING

PROBLEM
The motor does
not start.
11
WARNING
WARNING
WARNING
NOTE
POSSIBLE
SOLUTION
CAUSE
The power switch
Set the power
is off.
switch to the
"ON" ( | ) posi-
tion.
You do not install
Install the battery
the battery pack.
pack.
The power switch
Pull the gun trig-
is on, but you do
ger.
not pull the gun
trigger.
EN

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Pwc301

Tabla de contenido